Contact Supplier

wangchengfeng

wangchengfeng

Your inquiry content must be between 10 to 5000 characters

Please enter Your valid email address

Please enter a correct verification code.

Wuhan Guodian Mingke Electric Co., Ltd. AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
  • wangchengfeng
    Hi there! Welcome to my shop. Let me know if you have any questions.

Please enter a correct verification code.

wangchengfeng
Hi there! Welcome to my shop. Let me know if you have any questions.

Functional characteristics of CVT AC resonance test system

2021-04-22 10:41:21
Functional characteristics of CVT AC resonance test system

Capacitive voltage transformer (CVT) in calibration the test must be conducted under the condition of 50Hz frequency complex geographical condition on site at the same time the traditional experiment device is difficult to meet the requirements of on-site handling testing series resonance booster device is first used in domestic field tunable resonance device has been widely used in domestic 500 kv and below the field calibration of capacitor voltage transformer.

 

Product Characteristics

  • 1、Due to full compensation of resonant reactive power the power of power supply and equipment is less than 1/10 of the required capacity of the subject (1/Q>10). Small size and light weight with the same capacity large output capacity of the device and small power capacity required cheap convenient and safe to use;

  • 2、Series resonance is actually a current filtering circuit so that the current passing through the subject is basically the fundamental current and the waveform distortion rate (THD) of the output voltage is very small which is superior to all existing ac voltage withstand equipment.

  • 3、The short circuit current of the sample after flashover or breakdown is only less than 1/10 (1/Q) of the test current before short circuit which can effectively prevent the expansion of damage to the fault point after breakdown;

  • 4、After flashover the arc will be automatically extinguished immediately. The long (number of seconds) process of restoring resonant state voltage after arc quenching is a steady-state establishment process and there is no danger of voltage overshoot and no danger of restoring overvoltage in microsecond millisecond transient process.